Oscar Ply manufactures MR, BWR and BWP grade construction plywood, block boards and flush doors at its Raebareli plant and supplies builders, contractors and dealers across Maharashtra with full load and part load dispatch to site.
Maharashtra tests plywood harder than most states. The Konkan monsoon over Mumbai, Thane and Ratnagiri is among the wettest in the country and finds every weak glue line, while Vidarbha summers at Nagpur, Akola and Chandrapur dry a badly seasoned sheet until shutters twist. Oscar Ply builds for both with selected hardwood core veneers, undiluted phenol formaldehyde resin and vacuum pressure preservative treatment that carries right through the panel.
Every sheet is produced at our Raebareli factory and checked for bonding strength, moisture content, thickness tolerance and water resistance before it leaves the plant. Builders, interior contractors, furniture units and dealers across Maharashtra buy direct from the manufacturer, which keeps rates transparent and the same grade, shade and thickness coming on every reorder.
One manufacturer for the full panel requirement of a building, from structural formwork right through to doors and furniture.
MR Grade
Versatile commercial plywood, perfect for all construction needs, from site carpentry and partitions to general interior joinery.
View Product
Waterproof
BWP grade plywood, ideal for waterproof, strong structures, kitchens, bathroom vanities and humid coastal interiors.
View Product
Formwork
Durable plywood for concrete formwork, ideal for repeated use on construction sites with a clean release from cured concrete.
View Product
Block Board
Moisture-resistant MR grade block board for durable construction, engineered for strength and stability in doors, panels and partitions.
View Product
Water Resistant
Durable, water-resistant BWP block boards for strong furniture, wardrobes and long span shelving that must hold their shape.
View Product
Block Ply
High-quality commercial block plywood for versatile applications across residential and commercial interior work.
View Product
Doors
Sturdy, stylish, and secure flush doors for interiors, supplied to residential towers, hostels and commercial projects.
View Product
Fire Safe
Fire retardant treated plywood that slows flame spread, specified for high rise towers, IT parks, hotels and public buildings.
View ProductFrom a single flat interior in Pune to multi tower fit outs across Mumbai and Navi Mumbai.
Modular kitchens, wardrobes, door shutters and false ceiling framework for apartment towers in Mumbai, Thane and Pune.
Shuttering support, site offices, hoarding, staging and door frames where a panel has to take rough handling on an open site.
Office cabins, storage racking and partition work inside industrial units at Chakan, Waluj and Butibori.
Workstations, storage units, reception joinery and partitions for office fit outs in BKC, Hinjawadi and Kharadi.
Flush doors, cabinetry and furniture for hospitals, hotels, schools and hostels where hygiene and daily rough use both matter.
Doors, windows, kitchen units and built in furniture for independent houses across the state's towns and district headquarters.
The grades we dispatch to Maharashtra are built around a long service life. Core quality, glue line and preservative retention are the three things that decide whether a panel is still sound in ten years, and all three are controlled at the plant rather than corrected on site.
| Supply Region | All Maharashtra Districts |
| Core Material | Selected Hardwood Core, Zero Gap Composing |
| Grades Available | MR, BWR and BWP Grade |
| Bonding | Undiluted Phenol Formaldehyde Resin |
| Available Thickness | 4mm, 6mm, 9mm, 12mm, 16mm, 19mm & 25mm |
| Standard Sizes | 8x4, 8x3, 7x4, 7x3 & 6x4 ft |
| Density | 650+ kg/m³ |
| Moisture Content | 6% – 12% |
| Treatment | Vacuum Pressure Preservative |
| Surface Finish | Calibrated and Wide Belt Sanded |
Swipe the table sideways to see all values.
Four conditions that separate a panel still holding its shape in ten years from one that fails in two.
BWP bonded panels hold their glue line through Mumbai, Thane and Konkan monsoon humidity, which is where ordinary commercial plywood starts to delaminate at the edges.
Controlled moisture content keeps panels dimensionally stable through Nagpur and Solapur summers, so shutters stay flat and joints do not open up.
Preservative is driven through the veneer under vacuum pressure rather than brushed on, so protection stays intact even where the sheet is cut on site.
The same grade, shade and thickness on every reorder, which matters when a site runs across several months and more than one tower.
What each test measures, and what it actually means for the furniture, shutter or door built from that panel.
| Quality Check | What We Test | Our Benchmark | What It Means on Site |
|---|---|---|---|
| Glue Shear Strength | Bond strength between veneer layers | Tested dry and after water immersion | Layers stay bonded, so the panel does not separate at the edges after a few monsoons. |
| Boiling Water Resistance | Bond behaviour after a 72 hour boil | No delamination in the test cycle | Safe for kitchen sink units, bathroom vanities and coastal interiors across Mumbai and the Konkan belt. |
| Moisture Content | Water held inside the finished panel | Maintained between 6% and 8% | Panels do not swell in the rains or shrink in dry heat, so joints and shutters stay tight. |
| Thickness Tolerance | Uniformity across the full sheet | Calibrated and wide belt sanded | Laminate presses evenly and shutters line up without extra carpenter correction. |
| Preservative Retention | Chemical held inside the veneer | Vacuum pressure impregnated | Termite and borer protection stays intact even where the sheet has been cut. |
| Core Gap Inspection | Hollow pockets inside the core | Zero gap core composing | Screws and hinges hold firmly and shelves carry weight without bending. |
Swipe the table sideways to see all columns.
The checks that decide whether a plywood brand gets specified on a project in Mumbai, Pune or Nagpur.
Undiluted phenol formaldehyde resin holds the veneers together through the monsoon load that coastal Maharashtra puts on kitchen and bathroom furniture.
Zero gap core composing with no hollow pockets, so screws hold firmly and the panel carries weight without sagging over the years.
Preservative driven through the veneer under vacuum pressure rather than brushed on the surface, so protection survives every site cut.
Wide belt sanding and calibration keep thickness uniform across the sheet, which saves carpenter time on laminate pressing and shutter alignment.
MR, BWR and BWP grades plus block boards and flush doors from the same plant, so a whole project runs on one consistent specification.
Buying direct removes the trading margin, which shows up clearly on bulk project quantities for builders and large interior contractors.
Oscar Ply dispatches construction plywood, block boards and flush doors to builders, dealers and project sites in these cities and the districts around them.
Not listed above? We appoint dealers in open districts and still deliver project quantities anywhere in Maharashtra. Talk to our team.
Answers to what contractors, dealers and builders ask us most often before placing a first order.
Oscar Ply is a manufacturer, not a trading brand. Every sheet of construction plywood, block board and flush door is produced at our own plant at Kashimpur Baghel, Sultaanpur Road, Dighiya, Raebareli, Uttar Pradesh and dispatched directly to builders, dealers and project sites across Maharashtra.
We supply MR grade for dry interior work, BWR grade for areas that see occasional moisture, and BWP grade for kitchens, bathrooms and humid coastal interiors. Block boards, flush doors, shuttering plywood and fire retardant plywood come from the same plant, so one order covers a whole project.
Standard thicknesses are 4mm, 6mm, 9mm, 12mm, 16mm, 19mm and 25mm in 8x4, 8x3, 7x4, 7x3 and 6x4 ft sheets. Other sizes can be scheduled for bulk project quantities before production is planned.
BWP grade. It is bonded with undiluted phenol formaldehyde resin and tested for no delamination after a 72 hour boiling cycle, which is what a kitchen or bathroom unit in Mumbai, Thane or the Konkan belt needs to survive repeated monsoon seasons.
Yes. Preservative is driven into the veneers under vacuum pressure rather than brushed onto the surface, so protection against termites, borers and fungal decay stays intact even where the sheet is cut on site.
We appoint stocking dealers in districts that are currently open, with territory backing and priority dispatch. Share your city and current business profile and our team will confirm availability.
Call +91-9305851517, message us on WhatsApp or email apexplywoodi@gmail.com with the grade, thickness, size and quantity you need. Rates come directly from the manufacturer with no trading margin in between.
Send us the grade, thickness and quantity you need. Our team shares manufacturer rates, a sample board and a confirmed dispatch plan for your site or showroom.