Oscar Ply manufactures full eucalyptus hardwood core plywood at its Raebareli plant and supplies carpenters, furniture units, interior contractors and dealers across Telangana with full load and part load dispatch to shop or site.
Eucalyptus ply is the dense end of the commercial plywood range. Eucalyptus veneers are straight grained and hard, so a full eucalyptus core gives a heavier sheet that grips screws tightly, resists bowing under load and takes a clean machined edge. For shelving, wardrobe carcass work, kitchen units, counters and shop fit outs across Telangana, it is the sheet carpenters choose when the job has to carry weight.
Oscar Ply produces every sheet at its Raebareli factory and checks it for core gaps, bonding, moisture content and thickness tolerance before dispatch. Carpenters, furniture units, interior contractors and dealers from Hyderabad to Warangal buy direct from the manufacturer, which keeps rates transparent and the grade consistent from one order to the next.
One manufacturer for the full panel requirement of a home, showroom, office fit out or construction site.
Eucalyptus Core
Versatile commercial plywood, perfect for all construction needs. This is the range our full eucalyptus core sheets are supplied in for furniture and interior work.
View Details
Waterproof
BWP grade plywood, ideal for waterproof, strong structures such as kitchens, vanities and humid coastal interiors.
View Details
Block Board
High-quality commercial block plywood for versatile applications, from shutters and tables to long span panels.
View Details
MR Grade
Moisture-resistant MR grade block board for durable construction, doors, panels and furniture components.
View Details
BWP Grade
Durable, water-resistant BWP block boards for strong furniture that has to stand up to damp coastal conditions.
View Details
Doors
Sturdy, stylish, and secure flush doors for interiors, supplied to residential towers, hostels and commercial projects.
View Details
Formwork
Durable plywood for concrete formwork, ideal for repeated use on construction sites across the state.
View Details
Fire Safe
Treated panels that slow flame spread for high rise towers, IT parks, hotels and public buildings under fire safety norms.
View DetailsFrom a single wardrobe in Warangal to a full showroom fit out in Hyderabad and Karimnagar.
Carcass panels, shutters and loft storage where the sheet has to stay flat and hold hinges and channels firmly.
Dry zone cabinets and overhead units in apartment kitchens, with BWP recommended for the wash and sink run.
Display racks, counters, back panels and signage boards for retail work in Hyderabad, Warangal and Karimnagar markets.
Workstations, partitions, storage units and panelling for offices and workplaces in the Hyderabad, Gachibowli and HITEC City corridors.
Beds, sofa frames, TV units and dining furniture for furniture units that need the same grade on every repeat order.
Backing boards, box frames and wall panelling in thinner sections, where a dense core keeps fixings tight on a vertical face.
Core composition, glue line and moisture content are the three things that decide whether a sheet stays flat and holds a screw five years into service. All three are controlled at the plant rather than corrected at the carpenter's bench.
| Supply Region | All Telangana Districts |
| Core Composition | 100% Eucalyptus Hardwood Core |
| Bonding | MR Grade (BWP Grade Available) |
| Face Veneer | Sanded, Smooth Both Faces |
| Available Thickness | 4mm, 6mm, 9mm, 12mm, 15mm, 18mm & 19mm |
| Standard Size | 8 x 4 ft |
| Treatment | Borer & Termite Treated |
| Moisture Content | 8% – 12% |
| Core Quality | Zero Gap Core Composing |
Swipe the table sideways to see all values.
Four conditions that separate furniture still square after ten years from a unit that sags in the second monsoon.
Chemically treated veneers resist borer and termite attack, which is what quietly destroys untreated interior woodwork across Khammam, Kothagudem and Adilabad.
Controlled moisture content keeps sheets dimensionally stable through Ramagundam, Nalgonda and Mahbubnagar summers, so shutters do not twist out of line.
A dense eucalyptus core through the full build gives hinges, channels and handles consistent grip, with no soft pocket for a screw to strip out of.
The same grade, shade and thickness on every reorder, which matters when a furniture unit runs the same design across several flats.
What each check measures, and what it actually means for the wardrobe or counter built from that sheet.
| Quality Check | What We Test | Our Benchmark | What It Means on Site |
|---|---|---|---|
| Core Gap Inspection | Hollow pockets between core veneers | Zero gap core composing | Screws hold firmly and shelves do not dip under load after a year of use. |
| Glue Shear Strength | Bond strength between veneer layers | Tested dry and after water immersion | Layers stay bonded, so edges do not open up where a cut face meets humidity. |
| Moisture Content | Water held inside the finished sheet | Maintained between 8% and 12% | Panels stay flat in the rains and do not shrink in dry heat, so joints stay tight. |
| Thickness Tolerance | Uniformity across the full sheet | Calibrated and wide belt sanded | Laminate sits flat without packing and carcass joints line up cleanly. |
| Preservative Treatment | Borer and termite resistance | Treated veneers through the build | Interiors last through Telangana summers and monsoons instead of being eaten from inside. |
| Face Veneer Finish | Surface smoothness and patch quality | Sanded both faces | Laminate and veneer bond evenly with no telegraphing of defects through the finish. |
Swipe the table sideways to see all columns.
The checks that decide whether a plywood brand gets repeat orders from a furniture unit in Hyderabad, Warangal or Nizamabad.
Look at the cut edge. A solid, evenly composed core with no hollow pockets is what stops a shelf from sagging later.
Eucalyptus veneers right through the sheet, not a hardwood face hiding a softer or mixed core packed in behind it.
A sheet that sits flat on the floor saves carpenter time and keeps shutter lines straight after installation.
Treated veneers matter because the swing from a dry Deccan summer to a wet monsoon is where untreated ply fails quietly from inside.
Wide belt sanding keeps thickness uniform across the sheet, so laminate pressing and carcass joints come out clean.
Buying direct removes the trading margin, which shows up clearly on bulk quantities for dealers and furniture units.
Oscar Ply dispatches eucalyptus ply to carpenters, furniture units, dealers and project sites in these cities and the districts around them.
Not listed above? We appoint dealers in open districts and still deliver project quantities anywhere in Telangana. Talk to our team.
Answers to what carpenters, dealers and furniture units ask us most often before placing a first order.
Eucalyptus ply is plywood built with a full eucalyptus hardwood core. Eucalyptus veneers are dense and straight grained, so the sheet is heavier than poplar, holds screws and fittings firmly and carries load without bowing. It is the grade carpenters and furniture units in Telangana choose for shelving, wardrobe carcass work and anything that has to take weight.
Oscar Ply is a manufacturer, not a trading brand. Every sheet is produced at our own plant at Kashimpur Baghel, Sultaanpur Road, Dighiya, Raebareli, Uttar Pradesh and dispatched directly to carpenters, furniture units, dealers and project sites across Telangana.
Standard thicknesses are 4mm, 6mm, 9mm, 12mm, 15mm, 18mm and 19mm in the 8x4 ft sheet size. Other sizes can be scheduled for bulk project quantities. Share your cutting list and our team will confirm the most economical combination.
Yes. For dry interior work across the state our MR grade eucalyptus ply handles Deccan heat and the monsoon swing well when edges are sealed and polished. For kitchens, bathroom vanities, wash areas and ground floor units in Hyderabad or anywhere else we recommend stepping up to our BWP grade plywood, which is bonded with phenol formaldehyde resin.
Poplar ply uses a light poplar core and suits panelling, false ceilings and laminated furniture. Alternate ply mixes hardwood and poplar layers for a middle balance of weight and rate. Eucalyptus ply uses dense hardwood veneers right through, so it is the heaviest and strongest of the three, with the best screw holding for shelving, wardrobe carcass work and load bearing furniture.
We appoint stocking dealers in districts that are currently open, with territory backing and priority dispatch. Share your city and current business profile and our team will confirm availability.
Call +91-9305851517, message us on WhatsApp or email apexplywoodi@gmail.com with the thickness, size and quantity you need. Rates come directly from the manufacturer with no trading margin in between.
Send us the thickness, sheet quantity and delivery location. Our team shares manufacturer rates, a sample board and a confirmed dispatch plan for your workshop, site or showroom.