Oscar Ply manufactures heavy duty BWP bonded shuttering plywood at its Raebareli plant, tested to IS 4990, and supplies formwork contractors, builders and dealers across Assam with full load and part load dispatch to site.
Shuttering plywood fails in two ways on an Indian site: the bond lets go, or the panel bends under load. Oscar Ply shuttering plywood is built against both. Selected hardwood veneers are pressed to 800 plus kg per cubic metre and bonded with BWP grade phenol formaldehyde resin, then tested to IS 4990 for modulus of rupture, modulus of elasticity and nail and screw holding, so the panel carries a full pour without bellying and strips clean afterwards.
Assam conditions make that margin matter more than anywhere else. Rainfall runs for most of the year across Guwahati, Dibrugarh and the Barak valley, the Brahmaputra flood plain keeps humidity high between spells, and panels seldom dry out between pours. Every sheet is produced at our Raebareli factory and checked before dispatch, and contractors and dealers across the state buy direct from the manufacturer, which keeps rates transparent and repeat supply consistent.
One manufacturer for the whole job, from the formwork that shapes the concrete to the doors and furniture that go in afterwards.
BWP Grade
Durable plywood for concrete formwork, ideal for repeated use on construction sites, with a smooth film coated face for clean concrete release.
View Product
Waterproof
BWP grade plywood, ideal for waterproof, strong structures, site offices, kitchens and humid coastal interiors.
View Product
MR Grade
Versatile commercial plywood, perfect for all construction needs, from site carpentry and staging to partitions and general joinery.
View Product
Block Board
Moisture-resistant MR grade block board for durable construction, engineered for strength and stability in doors, panels and partitions.
View Product
Water Resistant
Durable, water-resistant BWP block boards for strong furniture, wardrobes and long span shelving that must hold their shape.
View Product
Block Ply
High-quality commercial block plywood for versatile applications across residential and commercial interior work.
View Product
Doors
Sturdy, stylish, and secure flush doors for interiors, supplied to residential towers, hostels and commercial projects.
View Product
Fire Safe
Fire retardant treated plywood that slows flame spread, specified for high rise towers, IT parks, hotels and public buildings.
View ProductFrom a single house roof slab in Jorhat to pier and girder pours on the Brahmaputra bridge projects.
Slab decking, column boxes, beam bottoms and shear wall shutters for apartment projects in Guwahati, Silchar and Dibrugarh.
Pier caps, box girders and retaining wall formwork for highway and irrigation work across the state.
Foundation pedestals, plinth beams and machine bases for refinery and tea estate work at Digboi, Duliajan and Numaligarh.
Core walls, lift shafts and staircase formwork for office and institutional buildings across Guwahati.
Deep raft pours, pile caps and thick retaining walls where the shutter has to hold a large head of wet concrete without deflecting.
Roof slabs, lintels and sunshades for independent houses where contractors need a panel that survives several pours.
The grade we dispatch to Assam is built around repeat use and load. Density, glue line and surface finish decide how many pours a panel survives, and all three are controlled at the plant rather than corrected on site.
| Supply Region | All Assam Districts |
| Core Material | Selected Hardwood Core |
| Glue Type | BWP Grade Phenol Formaldehyde |
| Surface Finish | Smooth Film Coated for Concrete Release |
| Available Thickness | 12mm, 15mm, 18mm & 21mm |
| Standard Size | 8 x 4 ft |
| Density | 800+ kg/m³ |
| Moisture Content | 6% – 8% |
| Standard Tested To | IS 4990 |
| Reusability | 15 – 20 pours in ideal conditions |
Swipe the table sideways to see all values.
Four things that separate a panel that lasts twenty pours from one that fails after five.
BWP bonded panels hold their glue line through Assam rainfall that runs most of the year, which is where ordinary MR shuttering fails fastest of anywhere in the country.
Controlled 6 to 8 percent moisture content keeps panels dimensionally stable in the short dry spell, so shutters do not warp or cup between pours.
45+ N/mm² modulus of rupture and 8000+ N/mm² modulus of elasticity mean the panel takes the weight and pressure of a full pour without deflecting between props.
The same grade, shade and thickness on every reorder, which matters when a site runs across several months and more than one tower.
The numbers our shuttering plywood is tested against, and what each one means for the slab or column cast from that panel.
| Property | Our Value | Test Method | What It Means on Site |
|---|---|---|---|
| Moisture Content | 6% – 8% | IS 4990 | Panels stay flat in the rains and do not shrink in dry heat, so joints stay tight. |
| Water Resistance (72 hrs boil) | No Delamination | IS 4990 | Safe for pours through the long Assam monsoon and Brahmaputra flood plain humidity. |
| Modulus of Rupture | 45+ N/mm² | IS 4990 | The panel takes the bending load of a deep pour without cracking between props. |
| Modulus of Elasticity | 8000+ N/mm² | IS 4990 | Deflection stays small, so the cast slab soffit comes out flat instead of bellied. |
| Nail Holding Capacity | 700+ N | IS 4990 | Nails stay put through stripping and re-fixing, which is what lets a panel be reused. |
| Screw Holding Capacity | 2200+ N | IS 4990 | Cleats, soldiers and walers stay tight on the panel under pour pressure. |
Swipe the table sideways to see all columns.
The checks that decide whether a shuttering brand gets repeat orders on a project in Guwahati, Silchar or Dibrugarh.
Undiluted phenol formaldehyde resin holds the veneers through wet curing, monsoon storage and repeated washing down between pours.
Zero gap core composing with no hollow pockets, so nails hold and the panel carries the concrete load without bellying out.
Ask for the modulus of rupture and nail holding numbers. A manufacturer who tests to IS 4990 can produce them; a trading house usually cannot.
Wide belt sanding and calibration keep thickness uniform across the sheet, which saves carpenter time aligning shutters on site.
Factory sealed edges keep water out of the core, the single biggest reason a shuttering panel fails early on an Indian site.
Buying direct removes the trading margin, which shows up clearly on bulk quantities for builders and large formwork contractors.
Oscar Ply dispatches shuttering plywood to formwork contractors, dealers and project sites in these cities and the districts around them.
Not listed above? We appoint dealers in open districts and still deliver project quantities anywhere in Assam. Talk to our team.
Answers to what contractors, dealers and builders ask us most often before placing a first order.
Oscar Ply is a manufacturer, not a trading brand. Every shuttering plywood sheet is produced at our own plant at Kashimpur Baghel, Sultaanpur Road, Dighiya, Raebareli, Uttar Pradesh and dispatched directly to contractors, dealers and project sites across Assam.
Under normal site handling our BWP bonded sheets deliver 15 to 20 pours. Sites that de-shutter carefully, seal cut edges and store panels flat regularly report more. In Assam, where a panel may never fully dry across a whole season, the 72 hour boil result is the number that actually predicts reuse.
Both are BWP bonded formwork panels from the same hardwood core. Film faced shuttering carries a heavier phenolic film for the cleanest possible concrete finish and the highest repeat count, while standard shuttering plywood is the workhorse grade for general slab, column and beam work. Our team will tell you which suits your pour.
Standard thicknesses are 12mm, 15mm, 18mm and 21mm in the 8x4 ft sheet size. Other sizes can be scheduled for bulk project quantities. Share your formwork drawing and our team will confirm the most economical combination.
Yes. Moisture content, 72 hour boiling water resistance, modulus of rupture, modulus of elasticity and nail and screw holding capacity are all tested against IS 4990. Test details for a specific grade or batch can be shared with the quotation for project supplies.
We appoint stocking dealers in districts that are currently open, with territory backing and priority dispatch. Share your city and current business profile and our team will confirm availability.
Call +91-9305851517, message us on WhatsApp or email apexplywoodi@gmail.com with the thickness, size and quantity you need. Rates come directly from the manufacturer with no trading margin in between.
Send us the thickness, sheet quantity and site location. Our team shares manufacturer rates, a sample board and a confirmed dispatch plan for your site or showroom.